Four Position Charger (base configuration)
TC400-04-PAN	Panasonic DVX-100, etc	$560.00
TC400-04-SON	Sony PD170, etc	$560.00
TC400-04-CAN	Canon XL2, etc.	$560.00
TC400-04-JVC	JVC GY-HD100 etc.	$560.00

TC400-04-PAN_SON Special combination of 2 Pan. and 2 Sony plates	$580.00
TC400-04-PAN_SON-TDM Special comb. of 2 Pan. and 2 Sony plates/W TDM	$648.00

Four Position Charger (with the TDM Charge/Discharge test Module)
TC400-04-PAN-TDM Panasonic DVX-100, etc	$627.00
TC400-04-SON-TDM Sony PD170, etc	$627.00
TC400-04-CAN-TDM Canon XL2, etc.	$627.00
TC400-04-JVC-TDM JVC GY-HD100 etc.	$627.00

Camera Power 7.2V option -7.2DC
Camera Power 7.2V option -7.2DC Panasonic DVX-100, etc	$93.00
Camera Power 7.2V option -7.2DC Canon XL2, etc.	$93.00
Camera Power 7.2V option -7.2DC JVC GY-HD100 etc.	$93.00
Camera Power 7.2V option -7.2DC High Power version All the above	$134.00

Car Power Cord DE_CAR_12 Connect a charger to Cigarette. socket
$27.00

Accepts Panasonic CGP (DVX100/HVX200 etc.), Sony L/M NPF970 (VX-2100/PD-170/HVR-V1/HVR-Z1 etc), Canon BP (XL2 etc.) and many other battery packs (each configuration comes with its adapter plate as ordered.)

Fast, safe simultaneous charge; high capacity battery packs (up to 6 AH) are ready in about 3.5 hours. As a battery being charged, charge status is displayed in Volts, mAh (as counted by the charger fuel gauge) and percent of charge (estimated, using proprietary algorithm)

Digital LCD display indicates the battery pack capacity, if fully discharged before insertion. Each of the 4 channels is fully independent of the others, batteries can be inserted/removed at any time.

A built-in Battery Test/Discharge Module cycles the pack through charge-discharge-charge, reports true capacity as tested (optional)

Worldwide 100-240V AC or 12V DC car power

A 7.2V DC output for camera operation from AC mains or 12V DC power source (optional) Small lightweight package

Warranty 2 years parts and labor

TURBO CHARGER TC40

Accepts Panasonic CGP (DVX100/HVX200 etc.), Sony L/M NPF970 (VX-2100/PD-170/HVR-V1/HVR-Z1 etc), Canon BP (XL2 etc.) and many other battery packs (each configuration comes with its adapter plate as ordered.) Four simultaneous charge positions for fast charging of 4 batteries.

LEDs indicate battery status

Fast, safe, and reliable charging. The battery pack can be left on the charger after the charge is complete.

Dynamic Power Management (DPM) minimizes battery charge time. By dynamically adjusting battery charge current, more current is allocated to the deeper discharged battery. Through this process all batteries are ready to use at about the same time.

Wide range input power compatibility (100-240VAC 50-60Hz), 12V with the DC cigarette lighter cord.

Compact, lightweight design for easy portability. Dimensions 10.5"x 4"x 1.5"

Warranty 2 years parts and labor

TURBO CHARGER TC200

Accepts Panasonic CGP (DVX100/HVX200 etc.), Sony L/M NPF970 (VX-2100/PD-170/HVR-V1/HVR-Z1 etc), Canon BP (XL2 etc.) and many other battery packs (each configuration comes with its adapter plate as ordered.) Two simultaneous charge positions for fast charging of 2 batteries.

LEDs indicate battery status

Fast, safe, and reliable charging. The battery pack can be left on the charger after the charge is complete.

Dynamic Power Management (DPM) minimizes battery charge time. By dynamically adjusting battery charge current, more current is allocated to the deeper discharged of the two batteries. Through this process both batteries are ready to use at about the same time.

Wide range input power compatibility (100-240VAC 50-60Hz), 12V with the DC cigarette lighter cord.

Compact, lightweight design for easy portability. Dimensions 5.5"x 4"x 1.5" Warranty 2 years parts and labor

DC CONVERTOR DC-7200

The DC-7200 DC voltage converter allows the user to connect any external 12V-25V DC power source to most 7.2 volt cameras.

It incorporates a highly efficient PWM switching power supply. An overvoltage/overcurrent/ reverse polarity protection circuit guards your camera during operation. It runs cool, as most of the battery charge is delivered to the camera, not dissipated as heat.

11V, 11.5V and 12V LEDs give you a precise indication of the battery charge left.

2.1mm DC jack functions as a 9-25V Power Tap connector for additional accessories (light, external monitor)

4-pin XLR DC IN jack

Metal construction

Dimensions 3"x2"x1.5"

Warranty 2 years parts and labor