DVDO iScan VP30 High-Definition Video Scaling Processor & Hub

Price: Discontinued

Call for lower pricing!

The DVDO® iScan™ VP30 is the next generation high-resolution video processor and A/V switcher that sets a new standard for up, down, and cross-converting all of your video sources. Whether it's your 480i cable feed, 480p DVD player, or 720p or 1080i HD set-top-box signal-the iScan VP30 scales your video output to perfectly match the optimum resolution of your display, up to 1080p! Plus, it's HDCP compliant over each of the 4 digital HDMI inputs, and accepts any legacy 480i/480p analog sources.

Serving as your complete A/V hub, the iScan VP30 provides simultaneous audio/video switching with "any rez in - any rez out" video conversion and one clean wire to your display. Add the iScan VP30 to your home theater today and prepare to be visually Captivated!

Key Features:

• Owners Manual in PDF document
• ABT's Precision Video Scaling II technology: 10-bit Scaling, Non-linear Scaling, Enhanced Sharpness Control
• Motion and source adaptive video deinterlacing for NTSC (3:2 and 2:2 pulldown; video) and PAL/SECAM (2:2 pulldown; video) sources
• User defined output resolution from 480p to 1080p
• Analog HD Transcoding and Processing
• Flexible Input and Output Aspect Ratio Control
• Display Profiles – For multiple display configurations (4)
• ABT's RightRate™ High-Performance Framerate Conversion
• ABT's AutoVFR™ - Intelligent Component Video Inputs with Automatic Video Format Routing
• Advanced Source Transition Management provides seamless transitions between source types
• ABT's AutoCUE-C™ - Automatic Chroma Upsampling Error detection & correction
• 10-bit, 300 MHz instrumentation-quality DACs, with up to 10x oversampling and 2X oversampling for 1080p
• Full-frame Timebase Correction
• High performance, multi-standard video decoders (10-bit: 480i/576i; 12-bit: 480p/576p/720p/1080i)
• High-quality super-adaptive comb filter with 2D Y/C separation
• Flexible Digital and Analog Audio switching and routing – four digital audio inputs and one analog audio input with two digital audio outputs (both active)
• ABT's Precision AV LipSync™ intelligent digital audio delay technology to match Audio & Video timing

Inputs

Twelve Video Inputs Available

• Two Composite (NTSC/PAL/SECAM)
• Two S-Video (NTSC/PAL/SECAM)
• Two Component (YPbPr or RGB/S) processes 480i/p, 576i/p, 720p, 1080i
• One RGBHV/Component (BNC-style connectors) processes 480i/p, 576i/p, 720p, 1080i
• Four HDMI processes 480i/p, 576i/p, 720p, 1080i
• One SD-SDI (Serial Digital Interface) Optional

Nine Audio Inputs

• Four HDMI
• Two Coaxial Digital
• Two Optical Digital
• One Analog Pair (L/R)

Outputs

One Analog Video Output

• Using High Quality BNC-style connectors
• Configurable for YPbPr, RGBHV, RGB/S, or RGB

One Digital Audio/Video Output

• Using HDMI (High Definition Multimedia Interface) connector
• Configurable for YPbPr or RGB
• Also carries digital audio

Two Digital Audio Outputs

• One Coaxial Digital
• One Optical Digital

Controls

Infrared remote control with direct access codes or manual controls on front panel

Functions accessible via either On Screen Display (OSD) or front-panel LED display

RS-232 port for software downloads and automation

Fully programmable controls for each separate video input with non-volatile memories:

• Automatic input source detection & input priority selection
• Input aspect ratio select: 4:3 fullframe, 4:3 letterbox, 16:9 fullframe or custom input aspect ratio
• Output aspect ratio select: 4:3, 16:9 or custom output aspect ratio
• Flexible horizontal and vertical Zooming and Panning controls
• Picture controls with memory for each input: Brightness, Contrast, Saturation, Hue, Y/C Delay, Sharpness

Output Controls:

• Analog/Digital, Format/Resolution, Aspect Ratio, Sync Type, Colorspace (RGB or YPbPr), Frame Lock, Display Profiles (4)

27 Built-in test patterns for ease of set up

Miscellaneous

Power

• Universal AC mains input: 100 - 240 VAC @ 50 - 60 Hz
• Consumption < 30W
• Sleep mode - automatic 30 second timeout indicated by power LED color change

Physical Dimensions

• 10.4”x17”x2.2” (26.3cmx43.4cmx5.5cm) with feet
• 10.4”x17”x1.8” (26.3cmx43.4cmx4.6cm) without feet
• Standard 19” 1U 1.75” Rackmount Kit Available (P/N 17-0307-05)

Weight

• Shipping – 10.5 lb (4.8 kg)
• Unit without Power Supply – 6.4 lb (2.9 kg)